西安鸿迈电子科技有限公司致力于为客户提供全方位的1553B解决方案，在自主研发的同时，代理国外众多知名公司生产的优秀的1553B相关产品。目前鸿迈电子提供全面的1553B应用总线互联产品，包括：1553B全系列接口卡，1553B连接器，1553B线缆组件等，各种产品均有现货供应，可及时满足客户需求。以下是代理的美国EXCALIBUR厂家资料。

EXC-1553UNET/Px（S）

The EXC-1553UNET/Px is an intelligent, single - or - dual channel, MIL-STD-1553 adapter. Its small size and ability to interface through USB or Ethernet interfaces make it a complete solution for developing, testing and performing system simulation of the MIL-STD-1553 bus, both in the lab and in the field.

The EXC-1553UNET/Px shares its API with the entire Px family so that applications currently running on PCI, PCIe, ExCARD or PCMCIA boards will run without change on this device.

Multiple units can operate via USB ports on the same computer. In addition, multiple units can operate on the same network, by programming each one with a unique IP address, and can be accessed from any computer on the network.

In addition the EXC-1553UNET/Px(S) provides 8 I/O Discrete signals and an IRIG B input. 

Multi Function

Each channel of the EXC-1553UNET/Px operates simultaneously as a Bus Controller and/or multiple (up to 32) Remote Terminals, or as a Triggerable Bus Monitor. The card supports error injection and detection. The adapter’s small size and compatibility with any computer using USB or Ethernet, makes it the perfect solution for performing system simulation of the MIL-STD-1553 bus, in the lab and in the field. 

Single Function 

Each channel of the EXC-1553UNET/PxS operates either as a Bus Controller, Remote Terminal, or Bus Monitor. 

The EXC-1553UNET/Px and EXC-1553UNET/PxS adapters are supplied with C drivers, including source code and may be used with Exalt, Excalibur’s Analysis and Laboratory Tools, a Windows monitoring application (only versions 8.1 or higher).

Ordering Information:

Part Number	Description
EXC-1553UNET/P1-[M or C]	Single channel MIL-STD-1553 multi function interface card
EXC-1553UNET/P2-[M or C]	Dual channel MIL-STD-1553 multi function interface card
EXC-1553UNET/P1S-[M or C]	Single channel MIL-STD-1553 single function interface card
EXC-1553UNET/P2S-[M or C]	Dual channel MIL-STD-1553 single function interface card

Note:  "-M" specifies panel mounted with BJ157 connectors

           "-C" specifies hard-wired 1553 cable connection

Additional options:
"-D"  1553 Direct bus coupling.

"-1760"  MIL-STD-1760 protocol support

"-P"  mounting plate

"-B"  internal rechargeable battery